Multi Location Uptime Monitoring From 6 Global Regions With Auto-Retry
A site that is down for one region can be perfectly fine for another. Uptimehub checks from 6 regions and confirms every failure across them, so you get real alerts and never false alarms.
Checked from regions with auto-retry. No single-location false alarms.
All systems operational. Steady pulse across every region.
api.example.com returned no response from all 6 regions. Auto-retry confirmed the outage, then we alerted your team.
api.example.com is back up. The incident is logged to your status page history automatically.
90-day uptime · branded · your domain
Live demo · drive it, no signup needed
In short
Multi location uptime monitoring checks your site or service from several geographic regions instead of a single point, so you see how availability differs around the world and avoid alerts caused by one bad network path. Uptimehub monitors from 6 global regions, US-East, US-West, EU-West, EU-Central, Asia, and South America, on every check by default at no extra cost. When one region reports a failure, Uptimehub automatically retries the check from other regions before alerting, so a transient hiccup in a single location does not wake you up. This cross-region confirmation is what eliminates the false positives that plague single-location tools. All checks are read-only and run from the outside, so nothing is installed and nothing changes on your servers.
What you get
Multi-region for developers, SaaS teams and agencies
6 global regions
Checks run from US-East, US-West, EU-West, EU-Central, Asia, and South America, giving you a truly worldwide view.
Auto-retry across regions
A failure in one region is re-checked from others before alerting, so a single flaky path never triggers a page.
Fewer false positives
Cross-region confirmation means the alerts you get reflect a real outage, not a local network blip.
Included by default
Multi-region checking is standard on every monitor and every plan, not a premium tier you have to buy up to.
How it works
From URL to alert in four steps
Add a monitor
Set up any check type. Multi-region monitoring is on automatically, with nothing to configure.
We check from 6 regions
Every probe runs from all regions so you see availability worldwide.
We retry before alerting
A single failing region is re-tested from the others to confirm it is a real outage.
Get a trustworthy alert
Only confirmed, cross-region outages reach you, in seconds, on your chosen channels.
FAQ
Questions buyers ask about Multi-region
Because availability is not a single global fact. Routing faults, CDN edge problems, regional DNS issues, and geo-blocking rules can take your site down for visitors in one part of the world while it loads perfectly from your desk. Checking from several regions is the only way to see those failures at all.
Enough to cover where your customers are, plus enough redundancy to tell a real outage from a bad network path. Three is the practical minimum for confirmation, and around six gives good continental coverage without producing noise. Adding dozens of locations mostly increases duplicate alerts rather than detection quality.
Cross-region confirmation means a failed check is immediately retried from other regions before any alert is sent. If the other regions succeed, the failure was almost certainly a transient network problem on the monitoring path. If they also fail, the outage is real. It is the single most effective filter against false alarms.
The usual causes are a CDN edge node serving stale or broken content, a BGP routing change affecting one transit path, a regional DNS resolver holding an outdated record, or a firewall or WAF rule that blocks traffic from certain networks. All of them are invisible to single-location monitoring.
With Uptimehub, no. Every monitor runs from all 6 regions on every plan, because charging per location pushes people into single-location monitoring, which is the configuration most likely to miss real outages and raise false ones. You pay per monitor, and the regions are included.
Last updated July 2026
More monitor types
Start monitoring in two minutes
Add a URL or endpoint and Uptimehub checks it every minute from 6 global regions, alerts you in seconds, and updates your branded status page. Read-only checks that never touch your servers.